|Oxygen Generator Capacity (Nm3/hr)||30 Nm3/Hr|
|Flow Rate(LPM)||500 LPM|
|Technology Used||PSA(Pressure Swing Adsorption)|
|Purity Of Oxygen||93+-3%|
|Installation Time||40-45 Days|
Ektelon assembled Fully Automatic Continuous operation PSA type Oxygen Gas Generation Plant, either site assembled or skid mountedwith Twin Tower filled with Zeolite, Outlet Oxygen flow of suitable capacity, outlet Oxygen Pressure of 4.0 bar g (±0.5), Oxygen purity of 93% (+/- 3%), End connections of ½” BSP F with all standard accessories.
1.Lubricated Screw Compressor of Suitable Capacity 2.Refrigerated air dryer with +5°C of Pressure Dew Point PDP, selection @ 50 Deg C Inlet Air Temp.
3.Pre Filter of 5 Micron rating.
4.Micro filter of 1 Micron rating.
5.Sub Micro filter of 0.01 Micron rating.
6.Activated Carbon filter of 0.003mg/m3 rating.
7.PSA Unit filled with Zeolite
8.After Filter @ 0.01 Micron capacity of 30m3/hr.
10.Dry Air Storage Tank MOC of IS 2062 & COC as per ASME SEC VIII / DIV 1 of adequate capacity
11.Oxygen Tank MOC of IS 2062 & COC as per ASME SEC VIII / DIV 1 of adequate capacity